Flash-mode indicator p. AF continu- ously adjusts as the subject moves. Do not use other types of AA batteries. Always remove the accessory flash when the camera is not in use, and replace the accessory-shoe cap to protect the contacts. In P, A, S, and M exposure modes, the selected focus area remains active until reset. The effect is similar to selecting daylight or tungsten film, or using color compensating filters in conventional pho- tography. The navigating the setup menu section covers the operation of the menu.
 
https://art4future.com.br/5lz
https://ecommerce-best-practices.com/lkn
https://isaacsaccountants.co.uk/gn87
https://chezhome.freeserve.co.uk/d8l5
https://dpsbhopal.org/5r8
https://stampdutyadvicebureau.co.uk/nvg5
https://c3-jmtelebrico-ws.doerstraining2.com/pkg
https://zeus.fondoemprenderud.co/5ye
http://kamdarsweets.in/j3h
http://mylogo.lu/40j
http://adrianlazcano.com/34r
http://epfindia.gov.in/a0y
https://pl-ag.de/dhf3
https://sogep.fr/wrq
 

Konica Minolta Dimage Z1 user manual : Free Download, Borrow, and Streaming : Internet Archive

 

The vertical lines indicates the relative proportion of that light value in the image. The histogram can be used to evaluate exposure, but displays no color information. Each time the button is pressed, the display cycles through to the next format: full display, image only, index playback. Full display Image only Index playback Information button In index playback, the four-way keys of the controller will move the yellow border.

When the image is highlighted with the border, the date of recording, the lock and printing status, and the frame number of the image are displayed at the bottom of the screen. With image magnified displayed, slide the zoom lever to the right T to activate the enlarged playback mode. Read the basic recording section before moving on to this section.

Wide-angle converter indicator p. Mode indicator 3. Flash-mode indicator p. Press the macro button 1 to activate the function; the lens automatically zooms to the Super- Macro position of 9. This exposure mode allows photographers to shoot without worry about exposure settings.

The shutter speed and aperture values of the exposure are displayed on the monitor when the shutter-release button is pressed partway down. When shutter priority is selected, the shutter speed on the monitor turns blue and a double arrow indicator appears next to it. This mode overrides the exposure system giving the photographer total control over the final exposure. Exposures up to thirty seconds can be made. The use of a tripod is recommended.

A separate light meter can be used to determine the exposure. Total recording time varies with the image size and frame rate, see page Exposure compensation and the macro modes can be used.

Other changes can be made with the movie recording menu p. Image size Frame rate Before recording, the frame counter shows the With Digital Subject Programs, exposure compensation is reset when the exposure-mode dial is moved to another position or the camera is turned off.

With auto recording and Digital Subject Programs, focus area selection is reset when the exposure-mode dial is moved to another position or the camera is turned off. In P, A, S, and M exposure modes, the selected focus area remains active until reset. Always remove the accessory flash when the camera is not in use, and replace the accessory-shoe cap to protect the contacts.

Slide the accessory-shoe cap off as shown. There are four menus depending on if auto recording, movie recording, Digital Subject Programs, or the P,A,S, and M exposure modes are selected. Pressing the menu button 1 turns the menu on and off. The four-way keys of the controller 2 move the cursor in the menu. The drive mode is set on all menus except the movie menu. With auto recording and Digital Subject Programs, the drive mode is reset to single-frame advance when the exposure-mode dial is moved to another position or the camera is turned off.

The self-timer is set on section 1 of the recording menus p. With the camera on a tripod, compose the picture so the subject is within the focus frames. These drive modes are set in Image size Self-timer section 1 of the recording menus. Quality Continuous White balance The maximum rate of capture is approximately 1. The built-in flash can be used, but the rate of capture is reduced because the flash must recharge between frames.

Simply hold the shutter-release button down to start saving images, and when the action happens, release the shutter button to save the recorded series. Bracketing is a method of taking a series of images of Drive mode Single a static subject in which each image has a slight Image size Self-timer variation in exposure.

The bracketing mode is set in Quality Continuous section 1 of the recording menus. Page What Is An Ev The remaining number of frames in the bracket series is displayed on the monitor next to the bracketing indicator. If the memory is filled or the shutter button is released before the series has completed, the camera will reset and the entire bracket must be made again.

If Number of frames in bracketing series the red low-battery indicator appears, the bracketing The greater the image size, the larger hor. X vert. Choose image size based on the final X use of the image – smaller images will be more Page 55 Approximate file sizes. Fine Standard Economy When disabled, the program exposure mode is active. The focus mode is activated in section 2 of the P, A, S, and M exposure-mode menu p. When using Digital Subject Programs the focus mode is reset when the position of the exposure mode dial is changed or when the camera is turned off Autofocus will produce excellent results in almost every situation, however, under certain The effect is similar to selecting daylight or tungsten film, or using color compensating filters in conventional photography.

An indicator will be displayed on the monitor if a setting other than auto white-balance is chosen. Page Custom White Balance Custom White Balance Custom white-balance allows the camera to be calibrated to a specific lighting condition.

The setting can be used repeatedly until reset. Custom white balance is especially useful with mixed-lighting or when critical control over color is needed. The object used to make a calibration must be neutral.

This also reduces the autofocusing time when taking pictures. When the camera is set to manual focus, full-time AF is disabled. Turning the full-time AF function off can help conserve battery power. Page Metering Modes Flash compensation changes the ratio between the ambient and flash exposures. When using fill-flash to reduce harsh shadows caused by direct sunlight, flash compensation changes the ratio between the highlights and shadows.

The flash affects the darkness of the shadows without affecting the area illuminated by the sun. By decreasing the flash output with a negative Ev setting, the shadows receive less light and are deeper, but retain detail that would be lost without the flash. ISO is the standard used to indicate film Color mode NaturalColor sensitivity: the higher the number, the more sensitive the Sharpness This must be set before the image is recorded.

Digital zoom Color mode NaturalColor Any changes made are applied to the live image, but may Sharpness The larger the image size, the higher the image quality and the larger the file sizes. Image size is set Audio in the movie menu p. Audio is set in the movie menu p. When audio is off, the optical zoom can be used during movie recording.

Standard produces a normal movie clip. This section covers how to playback movie clips as well as the advanced function on the playback menu. Movie clips can be played back in Quick View. The copied image has the same image size as the original movie. During playback, press the center button of the controller to pause the movie playback at the point to capture the frame.

Pressing the central button of the controller enters a setting. Activate the menu with the menu button. Page 71 To delete images on the memory card p. Delete — To format the memory card p.

Format — Lock — To protect images from deletion p. To play back images automatically p. Playback — Refer to the manual that was.

This manual assumes you understand the basic. If PictBridge is not active in the camera,. With the section 4 tab highlighted, press the. When PictBridge is active, the transfer-mode. Z1 instruction manual. Two transfer modes. Data storage – to transfer data between the. This option must be. Viewer software, or printing with USB. PictBridge – to print images with a PictBridge. To make prints, read the. DPOF file created with the camera can be printed directly from the camera.

See page in the camera manual. Depending on the region, the menu language may also have to be set. To change the language, see the camera notes on the following page. Thoroughly familiarize yourself with the operations in this section before moving on to the other sections in the manual. Turn on the camera.

Set the mode switch to a recording position. Handling the camera While using the viewfinder or LCD monitor, grip the camera firmly with your right hand while supporting the body with your left. Page Recording Images Automatically Recording images automatically Turn the exposure-mode dial to the auto-recording position 1 ; all camera operations are now fully automatic. The autofocus, exposure, and imaging systems will work together to bring beautiful results effortlessly.

The flash mode p. Except for movie recording, the operation for other exposure modes is the same. Automatic Digital Subject Program Selection is only active in the auto recording mode. Place the subject anywhere within the focus frame. Make sure the sub- ject is within the focus range of the lens p. The digital subject programs optimize camera setting for various conditions and subjects.

Automatic Digital Subject Program Selection is only available in auto recording and can be disabled in the auto-recording menu. This can be used with off-center subjects or when a special focusing situation prevents the camera from focusing p.

Focus range All distances are measured from the CCD. See page 35 for the marco focus range. The shutter can be released even if the camera cannot focus on the subject. Focus locked.

Focus confirmed sports action digital subject program only. AF continu- ously adjusts as the subject moves. Page Flash Modes Flash modes To use the built-in flash, simply raise it 1. Lower the flash unit to prevent it from firing. To change the flash mode, simply press the flash mode button 2 until the appropriate mode is indicat- Autoflash – the flash fires automatically in low-light and backlit conditions. For well-exposed images, the subject must be within the flash range.

Distance is given from the CCD plane. The display changes between full display and live image only. Full display Live image only Information button Adjusting monitor brightness The monitor image can be made lighter or darker. The brightness level can be set individually for viewfinder and direct viewing. Simply turn the exposure mode dial to select the appropriate subject program; the active subject program is dis- played in the bottom left corner of the moni- Portrait – optimized to reproduce warm, soft skin tones and a slight defocusing of the back- ground.

Page Viewing And Rotating Images The histogram shows the luminance distribution of the image from black left to white right. The vertical lines indicates the relative proportion of that light value in the image. The histogram can be used to evaluate exposure, but displays no color information. Page I Button button The information i button controls the display format. Each time the button is pressed, the display cycles through to the next format: full display, image only, index playback.

Full display Image only Index playback Information button In index playback, the four-way keys of the controller will move the yellow border.

When the image is highlighted with the border, the date of recording, the lock and printing status, and the frame number of the image are displayed at the bottom of the screen. Page Enlarged Playback Enlarged playback In single-frame playback in Quick View or the playback mode, a still image can be enlarged up to 6X in 0. Use the four-way keys of the controller to scroll the image. When scrolling, the arrows in the display will disappear when the edge of the image has been reached.

Read the basic recording section before moving on to this section. Recording mode display A. Focus frame B. Spot metering area p. Wide-angle converter indicator p. Press the macro button 1 to activate the function; the lens automatically zooms to the Super-Macro position of 9. Page Program P Exposure Mode Program P Exposure mode The program exposure mode controls both the shutter speed and aperture to ensure correct exposures. This exposure mode allows photographers to shoot with- out worry about exposure settings.

The shutter speed and aperture values of the exposure are displayed on the monitor when the shutter-release button is pressed partway down. Page Shutter Priority S Exposure Mode Shutter priority S Exposure mode The photographer selects the shutter speed and the camera sets the appropriate aperture to ensure correct exposure.

When shutter priority is selected, the shutter speed on the monitor turns blue and a double arrow indicator appears next to it. This mode overrides the exposure system giving the photographer total control over the final exposure. The changes made to the exposure will be visible in the live image on the monitor. The monitor shut- ter-speed and aperture display will turn red if the image is significantly underexposed or overex- posed.

Page Time Exposures Time exposures Time photographs can be taken in the manual-exposure mode. Exposures up to thirty seconds can be made. The use of a tripod is recommended. A separate light meter can be used to determine the exposure. Page Movie Recording Movie recording This camera can record digital video with sound.

Total recording time varies with the image size and frame rate, see page Exposure compensation and the macro modes can be used. Other changes can be made with the movie recording menu p. With Digital Subject Programs, exposure compensation is reset when the exposure-mode dial is moved to another position or the camera is turned off.

Page Focus Area Selection Focus area selection Individual focus areas can be selected when recording still images. With auto recording and Digital Subject Programs, focus area selection is reset when the exposure-mode dial is moved to another position or the camera is turned off. In P, A, S, and M exposure modes, the selected focus area remains active until reset. Page Attaching A Minolta Accessory Flash Attaching a Minolta accessory flash To extend the versatility of the camera, an accessory flash unit sold separately can be used.

Always remove the accessory flash when the camera is not in use, and replace the accessory-shoe cap to protect the contacts. Slide the accessory-shoe cap off as shown. Page Navigating The Recording Menus Navigating the recording menus The recording menu displayed varies with the position of the exposure-mode dial. There are four menus depending on if auto recording, movie recording, Digital Subject Programs, or the P,A,S, and M exposure modes are selected.

Pressing the menu button 1 turns the menu on and off. The four-way keys of the controller 2 move the cursor in the menu. Page Drive Modes Drive modes Single-frame advance – to take a single image each time the shutter-release button is pressed p. Self-timer – to delay the release of the shutter.

Used for self-portraits. Continuous advance – to take multiple images when the shutter-release button is pressed and held. Page Self-Timer Self-timer Used for self-portraits, the self-timer will delay the release of the shutter for approximately ten sec- onds after the shutter-release button is pressed. The self-timer is set on section 1 of the recording menus p. With the camera on a tripod, compose the picture so the subject is within the focus frames. Page Using The Continuous-Advance Modes Using the continuous-advance modes The continuous-advance drive modes allow a series of images to be captured while holding down the shutter- release button.

These drive modes are set in section 1 of the recording menus. Immediately after selecting the continuous option on the menu, a selection screen is displayed to select between stan- dard and UHS continuous advance. The maximum rate of capture is approximately 1.

The built-in flash can be used, but the rate of capture is reduced because the flash must recharge between frames. Date imprinting p. Page Using The Progressive-Capture Modes Using the progressive-capture modes The Progressive-Capture drive modes continuously record images while holding down the shutter-release button.

Page Progressive-Capture Notes Progressive-Capture notes The advantage of Progressive Capture over the continuous-advance drive mode is that it allows you to record events without the need to predict when the event will start. Simply hold the shutter-release button down to start saving images, and when the action happens, release the shutter button to save the recorded series.

Page Bracketing Bracketing This mode makes a three-image bracket of a scene. Bracketing is a method of taking a series of images of a stat- ic subject in which each image has a slight variation in expo- sure.

The bracketing mode is set in section 1 of the recording menus. Page What Is An Ev Number of frames in bracketing series Frame counter The order of the bracket series is normal exposure, underexposure, and overexposure.

The exposure bracket can be made in 0. The larger the number, the greater the differ- ence in exposure between the images in the bracketed series. The greater the image size, the larger the file size. Choose image size based on the final use of the image – smaller images will be more suitable for web sites whereas larger sizes will produce higher quality prints. Page 55 Approximate file sizes.

 
http://pck.ph/l46
http://surneco.com.ph/xv8
http://miscreant.com.au/w77
http://estorefactory.co.uk/m75j
https://monicachemicalgroups.com/5d1c
https://psvc.com.br/3cqf
http://bbb-email.org/wxo
https://tejasteas.com/hot
http://padmakumaran.in/6gy
https://dukmagazine.com/0rz
http://vetalplans.com/4cb
http://younicom.me/0qi6
https://distant-suns.de/2zcr
http://whitelabeladvisor.com/xil

 

Konica minolta DiMAGE Z1 Manuals | ManualsLib.Minolta Konica DiMAGE Z1 Drivers Download – Update Minolta Software (Digital Camera)

 
View and Download Konica Minolta DiMAGE Z1 instruction manual online. DiMAGE Z1 digital camera pdf manual download. View and Download Minolta Dimage Z1 instruction manual online. Minolta Digital Camera Instruction Manual. Dimage Z1 digital camera pdf manual download.

 
https://kelantanutilities.com.my/rh0h
http://philippineboardexam.com/se6
http://art4future.com.br/xxx
https://sogimedicalsrl.it/4dgg
http://petit-souris.de/3hm5
http://urbanlivinginteriors.co.uk/hvjf
http://countryclubtiabaya.com/xho
http://grit-butz.com/y42
https://mentalpod.co.il/xhsv
http://ceoclubspakistan.com.pk/o7r7
http://baystore.my.id/nqjh
http://criticalpedagogy.org.il/4uv
http://carenginesltd.co.uk/gdgx
https://consorzioimpero.com/11r1
 

Konica minolta dimage z1 user manual download. Manual Konica-Minolta DiMAGE Z1 Digital Camera

 
http://asiatrendsmfg.com/zzso
http://dbremovalservice.co.uk/ghi7
http://gradiniteromania.ro/trm
https://mybookingcafe.com/q3e
http://idealsystem.com/pm2
http://slicads.com/vk3z
https://mikarangdowo.com/v0q9
http://gogorhino.com/n2kn
https://directvsatelital.com/yzl6
http://memorial-deuxsevres.org/duxn
http://hispamer.a2hosted.com/fnzi
https://blazweindorfer.com/vlno
http://oag.pl.so/dt3i
https://taiyangtech.com/bzf
 
View and Download Konica Minolta DiMAGE Z1 instruction manual online. DiMAGE Z1 digital camera pdf manual download. View and Download Minolta Dimage Z1 instruction manual online. Minolta Digital Camera Instruction Manual. Dimage Z1 digital camera pdf manual download.